All SDI-12 to Analog Converter connections are easily accessible screw terminals. The SDI-12 to Analog Converters are housed in a small, light-weight DIN rail package. 4ch EX-SDI 2.0 to Cat5/UTP Converter Kit CE-HDMI2EX HDMI to EX-SDI 2.0 Converter CE-EX2HDMI EX-SDI 2.0 to HDMI Converter CE-HD04SW EX-SDI 2.0 Quad Sequencer CE-EX-VDA16 16 CH EX-SDI Splitter CE-EX-VDA4 4 CH EX-SDI Splitter CE-SD2HD Analog to HD-SDI Converter CE-HD2FO-RX1 HD-SDI & RS485 Over Fiber Optic Receiver CE-HD2FO-TX1 HD-SDI. All user programming for the SDI-12 to Analog Converter is done on the SDI-12 bus. SDI-12 to Analog Converter features include: (1) 0 to 5 VDC output and user selectable current output of 0 to 1 mA, 0 to 20 mA, or 4 to 20 mA (2) the SDI-12 to Analog Converter can either act as the SDI-12 master polling the sensor on a timed basis, poll the sensor in response to a logic high on the “Read” terminal, or merely listen while another device polls the sensor (3) the SDI-12 to Analog Converter’s output is proportional to the “value” of the sensor response and (4) the SDI-12 to Analog Converter’s current drops to less than 500 uA during sleep. The SDI-12 to Analog Converter does this for a single SDI-12 address and parameter (i.e., on a Pressure Transducer with a temperature sensor, the output would be for pressure only). The SDI-12 to Analog Converter – Model 4015-01 signal conditioning module converts SDI-12 data to an analog output.
